LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Brakes >> Traction Control >> VSA (Vehicle Stability Assist) System >> VSA OFF Switch Test

VSA OFF Switch Test

  1. Remove the instrument fascia (see DRIVER'S SWITCH PANEL REMOVAL/INSTALLATION ).
  2. Remove the VSA OFF switch (A) from the switch panel.
    Fig 1: Identifying VSA Off Switch From Switch Panel
    G05498647Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the VSA OFF switch 6P connector.
  4. Check for continuity between the VSA OFF switch 6P connector terminals No. 4 and No. 6. There should be continuity when the switch is pressed, and no continuity when the switch is released.
    Fig 2: Checking Continuity Between VSA Off Switch 6P Connector Terminals No. 4 And No. 6
    G05498648Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals