LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> DTC Troubleshooting >> DTC B2190: Front Passenger's Power Window Position Detect Circuit Error

DTC B2190: Front Passenger's Power Window Position Detect Circuit Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
  1. Clear the DTCs with the HDS.
  2. Turn the ignition switch OFF, and then back ON (II).
  3. Open and close the front passenger's window by using the front passenger's power window switch manually.
  4. Check for DTCs with the HDS.

    Is DTC B2177 or B2178 also indicated? 

    YES  - Troubleshoot the indicated DTC(s) first.

    NO  - Go to step 5.

  5. Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT  ).
  6. Clear the DTCs with the HDS.
  7. Turn the ignition switch OFF, and then back ON (II).
  8. Open and close the front passenger's power window by using the front passenger's power window switch manually.
  9. Check for DTCs with the HDS.

    Is DTC B2190 indicated? 

    YES  - Go to step 10.

    NO  - The system is OK at this time.

  10. Turn the ignition switch OFF.
  11. Substitute a known-good passenger's MPCS unit.
  12. Clear the DTCs with the HDS.
  13. Turn the ignition switch OFF, and then back ON (II).
  14. Open and close the front passenger's power window by using the front passenger's power window switch manually.
  15. Check for DTCs with the HDS.

    Is DTC B2190 indicated? 

    YES  - Replace the front passenger's window motor.

    NO  - Replace the passenger's MPCS unit.

scientia non olet · About LEMON Manuals