DTC B1610: Keyless Access Control Unit Lost Communication with Gauge Control Module (VSP/NE Message)
- Clear the DTCs with the HDS.
- Touch the door outer handle switch to lock the door.
- Check for DTCs with the HDS.
Is DTC B1610 indicated?
YES - Go to step 4.
NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections.
- Check for DTCs with the HDS.
Are DTCs B1011, B1060, B1205, B1405, B1805, and B2160 also indicated?
YES - Do the gauge control module input test (see GAUGE CONTROL MODULE INPUT TEST ).
NO - Replace the keyless access control unit.