DTC B2159: Driver's MPCS Unit Lost Communication with Keyless Access Control Unit (REMOTE Message)
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A
).
- Clear the DTCs with the HDS.
- Turn the ignition switch OFF, and then back ON (II).
- Check for DTCs with the HDS.
Is DTC B2159 indicated?
YES - Go to step 4.
NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections.
- Check for DTCs with the HDS.
Is DTC B1161 also indicated?
YES - Do the keyless access control unit input test (see CONTROL UNIT INPUT TEST ).
NO - Do the driver's MPCS unit input test (see DRIVER'S MPCS UNIT INPUT TEST ).