Interface Dial Connector for Inputs and Outputs

When replacing an interface dial connector, match the wires to the cavities listed in the following table.

Fig 1: Identifying Interface Dial Connector

Courtesy of AMERICAN HONDA MOTOR CO., INC.

WIRE CAVITY CHART

Cavity

Wire

Connects to

WHT

Navigation unit (JOG)

GRY⁽¹⁾

Navigation unit (JOG Shield)

BLK

Ground (G506)

PUR

Interface dial power supply (ACC)

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.