LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> External Pages >> Different car >> Section 1274 (Maintenance) >> General Information >> Multi-information Display >> Service Information

Service Information

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. The remaining engine oil life (A) is shown as a percentage on the multi-information display. To see the current engine oil life, turn the ignition switch to the ON (II) position, then push and release the Sel/Reset switch repeatedly until the engine oil life displays.
    Fig 1: Screen Display - Engine Oil Life
    G05484433Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. When the ignition switch is in the ON (II) position, and the remaining engine oil life is 6% to 15%, the remaining engine oil life and other scheduled maintenance item(s) needing service are displayed. The maintenance system message "SERVICE DUE SOON" (A) also come on. To cancel the message, press the Info button. The display continues to show the remaining engine oil life (B) and the message indicator (C) until it is reset.
    • Complete list of maintenance main items (D) (see MAINTENANCE MAIN ITEMS  ).
    • Complete list of maintenance sub items (E) (see MAINTENANCE SUB ITEMS  ).
      Fig 2: Screen Display - SERVICE DUE SOON
      G05484434Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. When the ignition switch is in the ON (II) position, and the remaining engine oil life is 1 % to 5 %, the maintenance system message "SERVICE DUE NOW" is displayed along with the same maintenance item code(s). If the maintenance system message display is cancelled, a "SERVICE' message appears.
    Fig 3: Screen Display - SERVICE DUE NOW
    G05484435Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. When the ignition switch is in the ON (II) position, and the remaining engine oil life is 0 %, the maintenance system message "SERVICE PAST DUE" is displayed along with the same maintenance item code(s).
    Fig 4: Screen Display - SERVICE PAST DUE
    G05484436Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. If the indicated maintenance is not done, the "SERVICE PAST DUE" message shows a negative mileage, for example "-10," on the display. If the negative mileage is between 0 and -9, the message is displayed for only a few seconds when the ignition switch is turned to the ON (II) position. The negative mileage (A) remains displayed after the vehicle is driven more than 10 miles (for USA models) or 10 km (for Canada models) after 0 % oil life is reached, and the display cannot be cancelled. This means the indicated maintenance item(s) should have been done more than 10 miles (or 10 km) ago.
    Fig 5: Screen Display - SERVICE PAST DUE
    G05484437Courtesy of AMERICAN HONDA MOTOR CO., INC.