LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> CMP Pulse Plate A Replacement

CMP Pulse Plate A Replacement

  1. Remove the cylinder head cover (see CYLINDER HEAD COVER REMOVAL ).
  2. Remove the camshaft position (CMP) sensor A (see CMP SENSOR A REPLACEMENT ).
  3. Hold the camshaft with an open-end wrench, then loosen the bolt.
    Fig 1: Loosening Camshaft Bolt
    G05444410Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the camshaft position (CMP) pulse plate A.
    Fig 2: Camshaft Position Pulse Plate (A) With Torque Specifications
    G05444411Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the CMP pulse plate A in the reverse order of removal.
scientia non olet · About LEMON Manuals