LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> Electrical >> Body Electrical >> Under-Dash Fuse/Relay Box >> Removal and Installation >> Installation

Removal and Installation: Installation

  1. Install the relays and connect the connectors to the under-dash fuse/relay box, then install the under-dash fuse/relay box in the reverse order of removal.
  2. Install the removed parts in the reverse order of removal.
  3. Do the battery terminal reconnection procedure (see RECONNECTION ).
  4. Register the immobilizer system with the HDS (see IMMOBILIZER KEY REGISTRATION ).
    NOTE: The imoes unit is built into the MICU which is part of the under-dash fuse/relay box. Because of this construction, the imoes must be registered, or the vehicle will not start.
  5. Confirm that all systems work properly.
scientia non olet · About LEMON Manuals