Hood Latch Replacement

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Detach the clips, then remove the hood lock cover (A).

Fig 1: Identifying Hood Lock Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect and detach the hood latch switch connector (A).

Fig 2: Hood Latch Switch With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts, then remove the hood latch (B) from the body, and disconnect the hood opener cable (C) from the hood latch.
Install the latch in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Apply multipurpose grease to each location of the hood latch indicated by the arrows.
- Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly.
- Adjust the hood latch alignment (see HOOD ADJUSTMENT ).
- Make sure the hood opens properly and locks securely.

Fig 3: Identifying Multipurpose Grease Applying Area

Courtesy of AMERICAN HONDA MOTOR CO., INC.