LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> RDX >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Driver Position Memory System (DPMS) >> General Troubleshooting Information >> Displaying the Diagnostic Trouble Code (DTC)

Displaying the Diagnostic Trouble Code (DTC)

  1. Turn the ignition switch OFF, and move the seat to a non-memorized position.
  2. Press and hold the SET button (A) and both position buttons (B) at the same time.
    Fig 1: Identifying SET Button And Position Buttons
    G05447704Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Turn the ignition switch ON (II), and wait at least 1 second, then release the three buttons.
  4. After 1 second, the position button indicators (C) will blink to show the DTC.
scientia non olet · About LEMON Manuals