Rearview Camera Removal/Installation
- Remove the rear license trim (see
REAR LICENSE TRIM REPLACEMENT
).
- Remove the inner taillight (see
FOG LIGHT ADJUSTMENT
).
- Inside the tailgate, disconnect the rearview camera connector (A) and free it from its mounting clip. Remove grommet (B) from the tailgate, then push the rearview camera connector through the hole in the tailgate.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove screws, then remove the rearview camera (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install in the reverse order of removal.