LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> MDX >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Block) >> Piston, Pin, and Connecting Rod Replacement >> Reassembly

Piston, Pin, and Connecting Rod Replacement: Reassembly

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a piston pin snap ring (A) on one side only.
    Fig 1: Installing Piston Pin Snap Ring
    G03639473Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Coat the piston pin bore in the piston, the bore in the connecting rod, and the piston pin with new engine oil.
  3. Heat the piston to about 158°F (70°C).
    Fig 2: Heating Piston
    G03639474Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Assemble the piston (A) and connecting rod (B) with the embossed marks (C) on the same side. Install the piston pin (D).
    Fig 3: Assembling Piston And Connecting Rod With Embossed Marks On Same Side
    G03639475Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the remaining snap ring.
scientia non olet · About LEMON Manuals