LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> MDX >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission) >> ATF Temperature Sensor Replacement

ATF Temperature Sensor Replacement

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the splash shield.
  2. Disconnect the ATF temperature sensor connector (A), then remove the connector from the connector bracket (B).
    Fig 1: Disconnecting ATF Temperature Sensor Connector (A)
    G03640357Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the harness clamp (C) from its bracket (D).
  4. Remove the ATF temperature sensor, and replace with new one.
  5. Install the new ATF temperature sensor (E) and a new O-ring (F).
  6. Install the ATF temperature sensor connector to the connector bracket, then connect the connector.
  7. Install the harness clamp on its bracket.
  8. Install the splash shield.
scientia non olet · About LEMON Manuals