LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> MDX >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transmission) >> A/T Interlock System >> Park Pin Switch Test/Replacement

Park Pin Switch Test/Replacement

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console panel and center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect the switch assembly connector (6P).
  3. Shift the shift lever into the P position, then check for continuity between the No. 2 and No. 4 terminals. There should be continuity.
    Fig 1: Disconnecting Switch Assembly Connector (6P)
    G03640546Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Shift the shift lever out of the P position, and check for continuity between the terminals in step  3. There should be no continuity.
  5. If the park pin switch is faulty, remove the shift lever assembly (see SHIFT LEVER REMOVAL  ), and replace the detent bracket (see SHIFT LEVER DISASSEMBLY/REASSEMBLY  ). (The park pin switch is not available separately.)
scientia non olet · About LEMON Manuals