VSA OFF Switch Test

Turn the ignition switch to LOCK (0).
Remove the driver's dashboard lower cover (see DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION ).
Push out the VSA OFF switch (A) from the back of the instrument panel.

Fig 1: Identifying VSA OFF Switch And VSA OFF Switch 5P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the VSA OFF switch 5P connector (B).
Check for continuity between the VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pressed, and no continuity when the switch is released.

Fig 2: Identifying Continuity Between VSA OFF Switch 5P Connector Terminals No. 1 And No. 2
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.

Fig 3: Identifying Continuity Between VSA OFF Switch 5P Connector Terminals No. 4 And No. 5
Courtesy of AMERICAN HONDA MOTOR CO., INC.