Drain Channel Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the moonroof glass (see Glass Replacement )
Remove the screws securing the dram channel (A)

Fig 1: Identifying Dram Channel Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Release the drain channel from both hooks (A) of the drain channel slider by pulling it rearward

Fig 2: Identifying Drain Channel Hooks
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the drain channel (A)

Fig 3: Identifying Drain Channel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the channel in the reverse order of removal, and check the glass position adjustment (see GLASS POSITION ADJUSTMENT )
Check for water leaks (see step 9 on DOOR GLASS ADJUSTMENT ) Let the water run freely from a hose without a nozzle Do not use a high-pressure spray