LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> CSX Base, K20Z1 >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Gauges >> Gauge Control Module Replacement >> Tachometer

Gauge Control Module Replacement: Tachometer

  1. Remove the subdisplay visor assembly (see SUBDISPLAY VISOR REMOVAL/INSTALLATION ).
  2. Remove the three screws from the GAUGE CONTROL MODULE (TACH)  (A).
    Fig 1: Identifying Gauge Control Module (Tach) 36P Connector
    G06268853Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 36P connector (B) from the gauge control module (tach).
  4. Install the gauge in the reverse order of removal.
scientia non olet · About LEMON Manuals