LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2007 >> CSX Base, K20A3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Fuel Supply System) >> Fuel Pressure Regulator Replacement >> With SH-AWD

With SH-AWD

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank unit (see REMOVAL (WITH SH-AWD) )
  2. Remove the bracket (A)
    Fig 1: Identifying Pressure Regulator And Bracket
    G05990421Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the pressure regulator (B)
  4. Install the parts in the reverse order of removal with new O-ring (C) When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank (see INSTALLATION (WITH SH-AWD) )
NOTE:
  • Coat the O-rings with clean engine oil, do not use any other oil or fluid
  • Do not pinch the O-rings during installation
  • Use all the new parts supplied in the pressure regulator replacement kit
scientia non olet · About LEMON Manuals