Selector Control Shaft Bearing Replacement

Special Tools Required 

• Driver 07749-0010000
• Attachment, 22 x 24 mm 07746-0010800

1. Remove the oil seal from the end cover, then remove the bearing.
   Fig 1: Removing Selector Control Shaft Bearing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new bearing flush to the end cover using the driver and the 22 x 24 mm attachment.
   Fig 2: Installing Selector Control Shaft Bearing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install a new oil seal.