Brake System Indicator Does Not Go Off

Turn the ignition switch ON (II).
Release the parking brake.
Does the brake system indicator go off after several seconds?
1. YES - The system is OK at this time.
2. NO - Go to step 3.
Check the brake fluid level (see BRAKE SYSTEM BLEEDING ).
Is the level OK?
1. YES - Go to step 4.
2. NO - Inspect the brake system for fluid leaks. If no leaks are found, replace all worn brake pads.
Check the ABS indicator.
Does the ABS indicator stay on?
1. YES - Read the DTC (see HOW TO RETRIEVE DTCS ), and do the applicable troubleshooting for the DTC.
2. NO - Check the brake system indicator circuit:
  - Short to body ground between the gauge control module and the parking brake switch.
  - Short to body ground between the gauge control module and the brake fluid level switch.
  - Parking brake switch stuck ON.
  - Brake fluid level switch stuck ON.
  - Faulty gauge control module.