LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2006 >> RL >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC >> Climate Control >> Rear Vent Control Motor Replacement

Rear Vent Control Motor Replacement

  1. Remove the utility pocket (see CENTER TRIM REMOVAL/INSTALLATION ).
  2. Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION ). Remove the rear vent duct (see step 6 under DASHBOARD/STEERING HANGER BEAM REMOVAL/INSTALLATION ).
  3. Disconnect the 5P connector (A) and duct (B).
    Fig 1: Identifying Duct And Rear Vent Control Motor
    G05496645Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the self-tapping screws and the rear vent control motor (A).
    Fig 2: Identifying Rear Vent Control Motor And Fasteners
    G05496646Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
scientia non olet · About LEMON Manuals