LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2006 >> RL >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC >> Climate Control >> Evaporator Temperature Sensor Replacement

Evaporator Temperature Sensor Replacement

  1. Remove the driver's dashboard undercover (see DRIVER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
  2. Disconnect the connectors (A) from the power tilt/ telescopic steering control unit, the adaptive front lighting control unit, the electronically controlled power steering control unit, and the daytime running lights control unit. Remove the relay (B) and the power tilt/telescopic steering control unit (C), then remove the self-tapping screws and the bracket (D).
    Fig 1: Identifying Control Units And Connectors
    G05496623Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the connectors (A) from the evaporator temperature sensor and the driver's cool vent control motor, then remove the connector clip (B). Remove the self-tapping screw and the evaporator temperature sensor (C).
    Fig 2: Identifying Evaporator Temperature Sensor And Connector
    G05496624Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals