Hood Insulator Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Using a clip remover, detach the clips. Release the hooks (A, B), then remove the hood insulator (C). Take care not to scratch the hood.

Fig 1: Identifying Hood Insulator Fastener Locations
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the insulator in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.