Vanity Mirror Light Switch Test

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the sunvisor (see SUNVISOR REMOVAL/INSTALLATION ).
Disconnect the 2P connector (A) from the sunvisor (B).

Fig 1: Identifying Sunvisor And 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the No. 1 and No. 2 terminals.
- With the vanity mirror cover (C) opened, there should be continuity.
- With the vanity mirror cover closed, there should be no continuity.
If the continuity check is not as specified, replace the sunvisor.