Vanity Mirror Light Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Wrap the tip of the screwdriver in tape.
Carefully slide the screwdriver between the metal mounting ring (A) and the headliner until the tip of the screwdriver is resting against the lens locking tab.
Vanity Mirror Light: 5W

Fig 1: Identifying Vanity Mirror Light Lens, Metal Mounting Ring And 2P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.

NOTE: Right side is shown. Left side is symmetrical.
Rotate the screwdriver handle toward the center of the vehicle while pressing the tip of the screwdriver against the locking tab to release the lens.
Pull the lens (B) down.
Disconnect the 2P connector (C) from the light.
Install in the reverse order of removal.