LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2006 >> RL >> Repair and Diagnosis >> Engine Performance >> Mode 6 - 2006 ACURA >> Mode $06 Information By Test >> EVAP System

EVAP System

DTC P0496: Test ID $81: Component ID $80

Test ID $81 Test Limit Type and Component ID $80
DTC P0496
Test Description EVAP canister purge valve "stuck open" check by monitoring fuel tank pressure sensor while the engine is running.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The highest limit value: Not applicable
DTC P2422: Test ID $82: Component ID $80

Test ID $82 Test Limit Type and Component ID $80
DTC P2422
Test Description EVAP canister purge valve "stuck close" check by monitoring fuel tank pressure sensor while the engine is running.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The highest limit value: Not applicable
DTC P2422: Test ID $8F: Component ID $80

Test ID $8F Test Limit Type and Component ID $80
DTC P2422
Test Description EVAP canister purge valve "stuck close" check by monitoring fuel tank pressure sensor at engine start.
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The highest limit value: Not applicable
DTC P0497: Test ID $88: Component ID $00

Test ID $88 Test Limit Type and Component ID $00
DTC P0497
Test Description Purge flow check by monitoring fuel tank pressure sensor value while the engine is running.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0457: Test ID $8B: Component ID $00

Test ID $8B Test Limit Type and Component ID $00
DTC P0457
Test Description Loose fuel cap check or gross leak check of EVAP system by monitoring the fuel tank pressure sensor signal while EVAP system is decompressing.
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0457: Test ID $8D: Component ID $00

Test ID $8D Test Limit Type and Component ID $00
DTC P0457
Test Description Gross leak check of EVAP system by monitoring the fuel tank pressure sensor value after decompress mode.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0442: Test ID $90: Component ID $00

Test ID $90 Test Limit Type and Component ID $00
DTC P0442
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value before purge started.
Store Timing Normal judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0442: Test ID $91: Component ID $80

Test ID $91 Test Limit Type and Component ID $80
DTC P0442
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value while the engine is running.
Store Timing Normal judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The highest limit value: Not applicable
DTC P0442: Test ID $92: Component ID $80

Test ID $92 Test Limit Type and Component ID $80
DTC P0442
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the decompression mode.
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The highest limit value: Not applicable
DTC P0442: Test ID $93: Component ID $00

Test ID $93 Test Limit Type and Component ID $00
DTC P0442
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the decompression mode.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg/min.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg/min.)
DTC P0456: Test ID $94: Component ID $00

Test ID $94 Test Limit Type and Component ID $00
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value while the engine is running.
Store Timing Normal judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0456: Test ID $95: Component ID $80

Test ID $95 Test Limit Type and Component ID $80
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the decompression mode.
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The highest limit value: Not applicable
DTC P0456: Test ID $96: Component ID $00

Test ID $96 Test Limit Type and Component ID $00
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the decompression mode.
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg/min.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg/min.)
DTC P0456: Test ID $97: Component ID $00

Test ID $97 Test Limit Type and Component ID $00
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the decompression mode.
Store Timing Normal judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg/min.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg/min.)
DTC P0456: Test ID $9A: Component ID $00

Test ID $9A Test Limit Type and Component ID $00
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the soak period after the engine is turned off. (EONV)
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) / 1024 - 32
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) / 1024 - 32
DTC P0456: Test ID $9B: Component ID $00

Test ID $9B Test Limit Type and Component ID $00
DTC P0456
Test Description Leak check of EVAP system by monitoring the fuel tank pressure sensor value during the soak period after the engine is turned off. (EONV)
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) / 32 - 1024
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) / 32 - 1024
DTC P0456: Test ID $9C: Component ID $00

Test ID $9C Test Limit Type and Component ID $00
DTC P0456
Test Description Leak check of EVAP system by monitoring time it takes the fuel tank pressure sensor to equal atmosphere pressure after the engine off. (EONV)
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 1.0 (sec.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 1.0 (sec.)
DTC P0456: Test ID $9D: Component ID $00

Test ID $9D Test Limit Type and Component ID $00
DTC P0456
Test Description Check of fuel tank pressure sensor signal unstable after the engine off. (early EONV)
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.001 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.001 (mmHg)
DTC P0456: Test ID $9E: Component ID $00

Test ID $9E Test Limit Type and Component ID $00
DTC P0456
Test Description Loose fuel cap check or gross leak check of EVAP system by monitoring the fuel tank pressure sensor signal while EVAP system is decompressing.
Store Timing Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.08 (sec.)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.08 (sec.)
DTC P0497: Test ID $B0: Component ID $00

Test ID $B0 Test Limit Type and Component ID $00
DTC P0497
Test Description Purge flow check by monitoring fuel tank pressure sensor value when the EVAP canister purge valve is closed.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0457: Test ID $B2: Component ID $00

Test ID $B2 Test Limit Type and Component ID $00
DTC P0457
Test Description Loose fuel cap check or gross leak check of EVAP system by monitoring the fuel tank pressure sensor signal while EVAP system is decompressing.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
DTC P0455: Test ID $B5: Component ID $00

Test ID $B5 Test Limit Type and Component ID $00
DTC P0455
Test Description Gross leak check of EVAP system by monitoring the fuel tank pressure sensor signal while EVAP system is decompressing.
Store Timing Normal judgement/Failure judgement
Conversion to Engineering Units Measured value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
The lowest limit value: Not applicable
The highest limit value: Output value (Decimal) x 0.1 (mmHg) - 3276.8 (mmHg)
scientia non olet · About LEMON Manuals