DTC B1136: Right Rear Power Window Switch Internal Error; DTC B1148: Left Rear Power Window Switch Internal Error
NOTE:
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Information marked with an asterisk ( * ) applies to the right rear power window.
- Clear the DTCs with the HDS.
- Turn the ignition switch OFF, and then back ON (II).
- Check for DTCs with the HDS.
Is DTC B1136* or B1148 indicated?
YES - Replace the left (right)* rear power window switch.
NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections.