LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head >> CMP Pulse Plate A Replacement

CMP Pulse Plate A Replacement

  1. Remove the cylinder head cover (see CYLINDER HEAD COVER REMOVAL  ).
  2. Hold the intake camshaft with an open-end wrench, then loosen the bolt.
    Fig 1: Identifying Intake Camshaft With Open-End Wrench
    G05490116Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the camshaft position (CMP) pulse plate A.
    Fig 2: Camshaft Position Pulse Plate W/Torque Specification
    G05490117Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the CMP pulse plate A in the reverse order of removal.
scientia non olet · About LEMON Manuals