'04 model
- Remove the driver's airbag assembly (see
DRIVER'S AIRBAG REPLACEMENT
).
- Remove the 4P connector (A) from the audio remote switch (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the two mounting screws and the switch.
- Measure the resistance between the No. 3 and No. 4 terminals in each switch position according to the table.
RESISTANCE REFERENCE
| Position |
Resistance |
| OFF |
About 10 kΩ |
| MODE |
About 3.7 kΩ |
| CH(+) |
About 1.7 kΩ |
| CH(-) |
About 775 Ω. |
| ↑ (VOL. UP) |
About 357 Ω |
| ↓ (VOL. DOWN) |
About 100 Ω |
- If the resistance is not as specified, replace the audio remote switch.