LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (PGM-FI System) >> CKP Sensor Replacement

CKP Sensor Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION ).
  2. Remove the drive belt auto-tensioner (see DRIVE BELT AUTO-TENSIONER REPLACEMENT ).
  3. Remove the upper cover (see step 10 on TIMING BELT REMOVAL ) and lower (see step 11 on TIMING BELT REMOVAL ) front covers from the engine.
  4. Remove the CKP sensor (A) from the oil pump.
    Fig 1: CKP Sensor With Torque Specifications
    G05458140Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the parts in the reverse order of removal.
  6. Do the CKP pattern clear/CKP pattern learn procedure with the HDS (see CRANK (CKP) PATTERN CLEAR/CRANK (CKP) PATTERN LEARN ).
scientia non olet · About LEMON Manuals