Rocker Arm Assembly Removal

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cylinder head cover (see CYLINDER HEAD COVER REMOVAL ).
Loosen the adjusting screws (A).

Fig 1: Identifying Rocker Arm Assembly Adjusting Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the bolts and the rocker arm assembly.
1. Loosen the rocker shaft mounting bolts in sequence two turns at a time, to prevent damaging the valves or rocker arm assembly.
2. When removing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and the rocker arms on the shafts.
  
  Fig 2: Identifying Rocker Shaft Mounting Bolts Loosening Sequence
  Courtesy of AMERICAN HONDA MOTOR CO., INC.