Microphone Removal/Installation

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove the roof console (see ROOF CONSOLE REPLACEMENT ).
Remove the screws and the printed circuit board (A).

Fig 1: Identifying Roof Console Printed Circuit Board And Fasteners
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connector (A) from the printed circuit board. Remove the bracket (B) and the microphone (C).

Fig 2: Identifying Microphone, Bracket And Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the microphone in the reverse order of removal.