Adaptive Front Lighting Gearbox Test
- Disconnect the adaptive front lighting gearbox 8P connector (A) from the headlight.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Measure the resistance between the adaptive front lighting gearbox 8P connector terminals No. 4 and No. 7, and between terminals No. 3 and No. 8. There should be about 4.5-5.5 2.
- If the resistance is not as specified, replace the adaptive front lighting gearbox.
- After replacement, do the adaptive front lighting control unit learning procedure (see ADAPTIVE FRONT LIGHTING CONTROL UNIT LEARNING PROCEDURE
).