AFS OFF Switch Test/Replacement

Remove the instrument fascia (see DRIVER'S SWITCH PANEL REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the AFS OFF switch (B).

Fig 1: Identifying AFS Off Switch And 6P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position as shown.

Fig 2: Checking For Continuity Between Terminals In Each Switch Position
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, remove the screws and replace the switch.
After replacement, do the adaptive front lighting control unit learning procedure (see ADAPTIVE FRONT LIGHTING CONTROL UNIT LEARNING PROCEDURE ).