Front Bulkhead Cover Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Take care not to scratch the front bumper and body.

Remove the front bulkhead cover (A).
1. Remove the clips.
2. Pass the hood latch knob (B) through the hole in the cover.
  
  Fig 1: Identifying Front Bulkhead Cover
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.