LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Fuel Supply System) >> Fuel Pressure Regulator Replacement

Fuel Pressure Regulator Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank unit (see FUEL TANK UNIT REMOVAL AND INSTALLATION  ).
  2. Remove the reservoir (A).
    Fig 1: Identifying Reservoir
    G05485282Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bracket (A).
    Fig 2: Identifying Fuel Pressure Regulator, Clip And Bracket
    G05485283Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the clip (B).
  5. Remove the fuel pressure regulator (C).
  6. Install the parts in the reverse order of removal with new O-rings (D).
    NOTE: Coat the O-rings with clean engine oil; do not use any other oils or fluids. Do not pinch the O-rings during installation.
scientia non olet · About LEMON Manuals