LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Driver Position Memory System (DPMS)) >> Driver's Power Seat Motor Test >> Recline motor

Recline motor

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the power seat wire harness 8P connector from the recline motor/lumbar support motor subharness.
    Fig 1: Identifying Power Seat Wire Harness 8P Connector
    G05488328Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Test motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.
    Fig 2: Terminal Specifications
    G05488329Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the motor does not run or fails to run smoothly, check for an open in the wire between the 8P connector and recline motor. If the harness is OK, replace the recline motor (see FRONT SEAT RECLINE MOTOR REPLACEMENT ).
scientia non olet · About LEMON Manuals