LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2004 >> TSX Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Input Shaft (Mainshaft) Speed Sensor Replacement

Input Shaft (Mainshaft) Speed Sensor Replacement

  1. Remove the intake air duct and the air cleaner assembly.
  2. Disconnect the input shaft (mainshaft) speed sensor connector, and remove the input shaft (mainshaft) speed sensor.
  3. Install a new O-ring (A) on a new input shaft (mainshaft) speed sensor (B), then install the input shaft (mainshaft) speed sensor in the transmission housing.
    Fig 1: O-Ring And Input Shaft (Mainshaft) Speed Sensor W/Torque Specification
    G05491355Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check the connector for rust, dirt, or oil, and clean if necessary, then connect the connector securely.
  5. Install the intake air duct and the air cleaner assembly.
scientia non olet · About LEMON Manuals