Resetting the power window

Resetting the power window is required when any of the following have been removed or repaired: 

• Power window regulator
• Power window motor
• Window run channel
• Front or rear door sash
• Door glass

Using the HDS 

1. Connect the Honda Diagnostic System (HDS) to the vehicle's DLC.
2. Turn the ignition switch ON (II), then enter the vehicle's VIN and mileage at the prompts.
3. Select Body Electrical from the System Selection menu.
4. From the Body Electrical System Select menu, select Power Windows.
5. From the Mode menu, select Adjustments.
6. From the Adjustment menu, select Window P Reset.
7. Follow the prompts on the screen.
8. Confirm that the power window control unit is reset by using the driver's window AUTO UP and DOWN function.