Rearview Mirror Replacement

Disconnect the connector (A).

Fig 1: Identifying Rearview Mirror Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Slide the mirror harness upper cover (B) forward, then remove the mirror harness cover (C) from the mirror base (D).
Using a TORX T20 bit, loosen the screw, then slide the rearview mirror (A) rearward and off the mount (B).

Fig 2: Mirror Harness Cover W/Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the mirror in the reverse order of removal, and note these items:
- Before installing the mirror, remove the TORX screw, and apply medium strength type liquid thread lock to it.
- Make sure the connector is plugged in properly.