DTC P0116: Engine Coolant Temperature Sensor Range/Performance Problem
NOTE:
If DTC P0117 and/or P0118 are set, troubleshoot those DTCs before proceeding.
- Start engine and run at 3000 RPM, with no load (in park or neutral), until radiator cooling fan comes on. Allow engine to idle.
- Using scan tool, check Engine Coolant Temperature (ECT) sensor data. If ECT sensor reading is 176-212°F (80-100°C) or voltage is .5-.8 volt, problem is intermittent. System is okay at this time. Check thermostat and cooling system. If ECT sensor reading is not 176-212°F (80-100°C) or voltage is not .5-.8 volt, check thermostat and cooling system. If thermostat and cooling system is okay, replace ECT sensor.