Fuel Fill Pipe Removal/Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Relieve the fuel pressure (see FUEL PRESSURE RELIEVING ).
Drain the fuel tank (see FUEL TANK DRAINING ).
Remove the fuel fill cap.
Remove the rear fender cover (see REAR FENDER COVER REPLACEMENT ).
Disconnect the fuel fill tube (A) and the quick-connector fittings (B).

Fig 1: Fuel Fill Tube And Quick-Connector Fittings With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the fuel fill pipe (C).
Install the parts in the reverse order of removal.