HFL/Navigation Microphone Removal/Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the dashboard and related parts.
Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.

Remove the roof console (see HEADLINER REMOVAL/INSTALLATION ).
Remove the screws and the printed circuit board (A).

Fig 1: Identifying Screws And Printed Circuit Board
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (B) from the printed circuit board.
Remove the screws and the microphone (A). ©

Fig 2: Identifying Screws And Microphone
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the microphone in the reverse order of removal.