Third Row Seat-back Recline Cable Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:

Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
Take care not to kink the cable.

Remove the third row seat-back recline lever (see THIRD ROW SEAT-BACK RECLINE LEVER REPLACEMENT ).
While holding the lever (A) open, carefully pry out the cover (B) with trim tool to release the tabs (C), then remove the cover.

Fig 1: Identifying Lever And Tabs
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the recline cable (A).

Fig 2: Identifying Recline Cable
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the third row seat-back recline cable in the reverse order of removal, and note these items:
- Make sure the cable is connected securely.
- Make sure the seat unlatches properly and latches securely.