LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (SRS (Supplemental Restraint System)) >> Precautions and Procedures >> Spring-Loaded Lock Connector >> Side Airbag Connector >> Disconnecting

Side Airbag Connector: Disconnecting

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

To release the lock, pull the spring-loaded sleeve (A) toward the stop (B) while holding the opposite half of the connector. Then pull the connector halves apart. Be sure to pull on the sleeve and not on the connector half.

Fig 1: Disconnecting Side Airbag Connector
G05488809Courtesy of AMERICAN HONDA MOTOR CO., INC.