Pre-Operation Check Set-up

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Make sure all the components of the front passenger's seat are correctly installed.
Position the front passenger's seat to the rearmost position. Adjust the seat-back to the forward most position. Do not move the seat from this position.
Make sure nothing is on or under the front passenger's seat.
Make sure there is nothing in the front passenger's seat-back pocket.
Keep the windows closed.
Do all calibration procedures, except test-driving, in the service bay.
Make sure the vehicle is on level ground.
Turn the heater and the A/C off.
Do not touch the passenger's seat during the calibration.
Do not expose the front passenger's seat to sudden temperature changes.
Make sure all aftermarket devices such as amplifiers, fluorescent light, air purifiers, CB or HAM radios, etc. are turned off.