Power Mirror Actuator Test: Notes

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The power mirror actuator can be tested by using the HDS and following these steps:

Select BODY ELECTRICAL from the SYSTEM SELECT menu.
Select FUNCTION TEST, and then the appropriate power mirror function test.

Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 16P connector (A) from the power mirror actuator (B).

Fig 1: Identifying 16P Connector And Power Mirror Actuator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check actuator operation by connecting power and ground according to the table.
LEFT

Fig 2: Actuator Operation Chart - Left
Courtesy of AMERICAN HONDA MOTOR CO., INC.

RIGHT

Fig 3: Actuator Operation Chart - Right
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the mirror fails to work properly, replace the mirror actuator.