DVD Player Unit Removal/Installation

SRS component locations for the appropriate year:

• '03 model (see 2003 MODEL )
• '04-06 models (see 2004-2006 MODELS )

Also review the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service.

1. Remove the console panel and center lower cover (see CENTER CONSOLE REMOVAL/INSTALLATION ).
2. Remove the cover (A) from the DVD player unit (B).
   Fig 1: Removing Cover From DVD Player Unit

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the screws and pull out the DVD player unit.
4. Disconnect the 26P and 8P connectors (or 22P connector)*.(C) from the DVD player unit.

   * : '05-06 models

5. Remove the four mounting screws, then remove the bracket.
   Fig 2: Removing Mounting Screws And Bracket

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Install in the reverse order of removal, and make sure the DVD player unit connectors are plugged in properly.