LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (3.2L V6 Engine) >> Engine Oiling >> Engine Oil >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2003 Acura 3.2TL, 2002 Acura 3.2TL, 2001 Acura 3.2TL, 2000 Acura 3.2TL, and 1999 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Under normal conditions, the oil filter should be replaced at every other oil change. Under sever conditions, the oil filter should be replaced at each oil change.

Change interval:

  1. Warm up the engine.
  2. Remove the drain bolt (A), and drain the engine oil. See Fig 1.
  3. Reinstall the drain bolt with a new washer (B).
  4. Refill with the recommended amount of oil. See OIL CAPACITY  table.
  5. Run the engine for more than 3 minutes, then check for oil leakage.
    OIL CAPACITY

    Application Specification - Qt. (L)
    At Oil Change 3.5 (4)
    At Oil Change Including Filter 3.9 (4.4)
    After Engine Overhaul 4.4 (5)
Fig 1: Removing Drain Bolt & Draining Engine Oil
G00298134Courtesy of AMERICAN HONDA MOTOR CO., INC.