LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Systems >> Component Tests >> PGM-FI Relay

PGM-FI Relay

  1. Remove PGM-FI relay located under left side of instrument panel. Connect battery voltage to relay terminal No. 2. Connect terminal No. 1 to ground. See Fig 1 .
  2. Test for continuity between relay terminals No. 4 and 5. If continuity exists, go to next step. If continuity does not exist, replace PGM-FI relay.
  3. Connect battery voltage to relay terminal No. 5. Connect terminal No. 3 to ground. Test for continuity between relay terminals No. 6 and 7. If continuity exists, go to next step. If continuity does not exist, replace PGM-FI relay.
  4. Connect battery voltage to terminal No. 6. Connect terminal No. 1 to ground. Test for continuity between relay terminals No. 4 and 5. If continuity exists, relay is okay. If continuity does not exist, replace PGM-FI relay.
    Fig 1: Identifying PGM-FI Relay Harness Connector Terminals
    G00009576Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals